This Capcom Service Bulletin applies to:
Pinball Magic, Airborne, Breakshot, Flipper Football, & KingPin Pinball
Back to all Capcom Pinball Service Bulletins
COIN-OP, INC.
(Pinball Division is out of business)
COIN-OP, INC.
TECHNICAL
SERVICE BULLETIN 96-005
DATE: APRIL 24, 1996
SUBJECT: CAPCOM
CLASSIC PINBALL LINE ELECTRONIC SYSTEM COMPATIBILITY
TO: ALL DISTRIBUTORS
CAPCOM HAS INTRODUCED
A NEW LINE OF PINBALL MACHINES ENTITLED “CAPCOM CLASSIC PINBALL LINE”,
BEGINNING WITH BREAKSHOT.
AS THERE ARE SLIGHT
PCB COMPATIBILITY CHANGES BETWEEN THE ‘CLASSIC’ AND THE STANDARD SYSTEMS THE
PURPOSE OF THIS BULLETIN IS TO DEFINE THE PCB COMPATIBILITY BETWEEN THE TWO
LINES.
THE “CAPCOM CLASSIC
PINBALL LINE” HAS A FOUR PC BOARD SYSTEM COMPARED TO A SIX PC BOARD SYSTEM USED
BY THE CAPCOM STANDARD PINBALL.
PROVIDED FOR YOUR
CONVENIENCE IS A PC BOARD AND FEATURE COMPARISON CHART OF THE TWO SYSTEMS.
|
STANDARD SYSTEM |
CLASSIC SYSTEM |
|
*
6 PCB SYSTEM |
*
4 PCB SYSTEM |
|
DISPLAY POWER |
DISPLAY POWER |
|
CPU |
CPU |
|
SOUND |
SOUND |
|
POWER SUPPLY |
POWER/DRIVER PCB |
|
DRIVER |
N/A |
|
SWITCH |
N/A |
|
*
SHORT PROTECT |
*
SHORT PROTECT |
|
LAMPS ROW/COLUMN |
LAMPS ROW/COLUMN |
|
SOLENOIDS |
SOLENOIDS |
|
SWITCHES |
SWITCHES ROW ONLY |
|
*
NO SWITCH
MATRIX |
*
1 (8 COLUMN x
7 ROW) MATRIX |
|
*
64 SWITCHES ON
THE SWITCH PCB |
N/A (NO SWITCH PCB) |
|
*
LAMP WARMING |
*
LAMP WARMING |
|
*
BURNED OUT
LAMP PROTECTION |
*
BURNED OUT
LAMP PROTECTION |
|
*
2 (8 x 8) LAMP
MATRICES A&B |
*
B LAMP MATRIX
ONLY |
|
*
NO G.I.
STRINGS |
*
64 G.I. FROM
THE TRANSFORMER |
|
*
SINGLE COIL
GAME (NOTE 1) |
*
SINGLE COIL
GAME (NOTE 1) |
|
*
ADJUSTABLE
FLIPPER POWER |
*
ADJUSTABLE
FLIPPER POWER |
|
*
PLAYFIELD EASY
LIFT MECHANISM |
*
PLAYFIELD EASY
LIFT MECHANISM |
|
*
16 PRIORITY
CPU SWITCHES |
*
16 PRIORITY
CPU SWITCHES |
|
*
32
COIL/FLASHER POSITIONS |
*
24 COIL
FLASHER POSITIONS |
|
*
LED STATUS
INDICATORS ON FUSES |
*
LED STATUS
INDICATORS ON FUSES |
|
*
MPEG |
*
MPEG |
|
*
3 CHANNEL
AUDIO |
*
1 CHANNEL
AUDIO |
|
*
(1) 8” AND (2)
4” SPEAKERS |
*
(1) 8” AND (2)
4” SPEAKERS |
|
*
128x32 DOT
MATRIX DISPLAY |
*
128x32 DOT
MATRIX DISPLAY |
|
*
PRINTER
CAPABLE |
*
PRINTER
CAPABLE |
|
*
TOKEN
DISPENSER CAPABLE |
*
TOKEN
DISPENSER CAPABLE |
|
*
TICKET
DISPENSER CAPABLE |
*
TICKET
DISPENSER CAPABLE |
“N/A” INDICATES THAT
IT IS NOT APPLICABLE
NOTE 1: BOTH SYSTEMS USE A SINGLE COIL
(23-800). HOWEVER, WE MAY USE A
DIFFERENT
COIL SIZE FOR SPECIAL APPLICATIONS (EXAMPLE: MAGIC WAND COIL IS
26-1200).
“CAPCOM CLASSIC PINBALL LINE” FEATURES
¨
THE CAPCOM
CLASSIC PINBALL LINE USES AN ECONOMICAL BOARD SYSTEM WITH THE FOLLOWING
ASSEMBLIES:
* POWER DRIVER BOARD
* SOUND BOARD
* CPU BOARD
* DISPLAY POWER SUPPLY BOARD
¨
CHANGES WHICH
HAVE REDUCED THE NUMBER OF PC BOARDS WITHOUT SACRIFICING RELIABILITY ARE:
* THE POWER SUPPLY, DRIVER BOARD, AND SWITCH
BOARD HAVE BEEN COMBINED TO MAKE THE POWER DRIVER BOARD.
* THE SOUND BOARD HAS BEEN CHANGED FROM 3
CHANNEL MONO TO 1 CHANNEL MONO.
* UTILIZES A
64 LAMP G.I. STRING FROM THE TRANSFORMER.
* UTILIZES 1 (8 COLUMN x 7 ROW) SWITCH
MATRIX.
¨
THE CLASSIC
SYSTEM OFFERS MANY OF THE SAME FEATURES THAT THE STANDARD SYSTEM USES:
* SHORT CIRCUIT PROTECTION (LAMPS ROW/COLUMN,
SOLENOIDS, SWITCHES ROW ONLY)
* MPEG AUDIO (1 CHANNEL MONO)
* LED STATUS INDICATORS ON FUSES
* LAMP WARMING
* ADJUSTABLE FLIPPER POWER
* 16 PRIORITY SWITCHES (CPU)
* BURNED OUT LAMP DETECTION
* PLAYFIELD EASY LIFT MECHANISM.
* PRINTER CAPABLE1.
* TOKEN DISPENSER CAPABLE1.
* TICKET DISPENSER CAPABLE1.
ATTACHED YOU WILL
FIND A PICTURE OF EACH PC BOARD AND A PARTS LISTING FOR THE ASSOCIATED BOARD.
THERE IS ALSO A
COMPATIBILITY CHART OF THE BOARDS PROVIDED FOR YOUR CONVENIENCE.
IF THERE ARE
ANY QUESTIONS REGARDING THIS, OR ANY OTHER ISSUE PLEASE FEEL FREE TO CONTACT
THE FIELD SERVICE DEPARTMENT.
THANK YOU.
PC BOARD COMPATIBILITY
|
PC
BOARD |
ASSEMBLY* |
STANDARD |
CLASSIC |
NOTE |
|
POWER
DRIVER |
A00177_03 |
X |
1 |
|
|
SOUND
|
A00217_01 |
X |
1 |
|
|
CPU |
A00154_05 |
X |
X |
4 |
|
DISPLAY
POWER SUPPLY |
A00155_05 |
X |
X |
6 |
|
DRIVER |
A00151_0X |
X |
2 |
|
|
POWER
SUPPLY |
A00152_0X |
X |
2 |
|
|
SOUND |
A00150_0X |
X |
X |
3 |
|
SWITCH |
A00153_0X |
X |
2 |
|
|
CPU |
A00154_0X |
X |
2 |
|
|
DISPLAY
POWER SUPPLY |
A00155_04 |
X |
X |
6 |
|
DISPLAY
POWER SUPPLY |
A00155_02 |
X |
5 |
* 0X REPRESENTS ASSEMBLY REVISION LEVEL.
LEGEND:
A00XXX
_0X
ASSEMBLY REVISION
NUMBER NUMBER
NOTE
1:
ONLY USED IN CAPCOM CLASSIC PINBALL GAMES AND IS NOT FOR USE WITH
CAPCOM STANDARD PINBALL GAMES.
2:
ONLY USED IN CAPCOM STANDARD PINBALL GAMES AND IS NOT FOR USE WITH
CAPCOM CLASSIC PINBALL GAMES.
3: THE
A00150 REVISION _0X (SOUND BOARD) CAN BE USED AS A SUBSTITUTE FOR
THE A00217 REVISION _01 (SOUND BOARD),
HOWEVER THE CORRESPONDING GAME
SOFTWARE (INCLUDING THE MICROCONTROLLER
U24) MUST BE INSTALLED FOR
PROPER GAME OPERATION.
4: THE
A00154 REVISION _05 (CPU) CAN BE USED IN ALL CAPCOM PINBALL
GAMES, HOWEVER THE CORRESPONDING GAME
SOFTWARE MUST BE INSTALLED FOR
PROPER GAME OPERATION.
5: THE
A00155 REVISION _02 (DISPLAY POWER SUPPLY) CAN BE UPGRADED.
PLEASE REFER TO SERVICE BULLETIN 95-017a
FOR FURTHER DETAILS.
6:
THESE BOARDS CAN BE USED IN ALL CAPCOM PINBALL GAME SYSTEMS WITH THE
EXCEPTION OF THE GAMES THAT HAVE A DISPLAY
WITH AN ONBOARD POWER
SUPPLY.
WHEN ORDERING ASSEMBLY, ORDER HIGHEST REVISION LEVEL.
ALL
ASSEMBLIES ARE SENT WITHOUT GAME SOFTWARE.
A00177 _03 POWER DRIVER BOARD
A00177 _03 POWER DRIVER BOARD
PARTS LIST
|
DES. |
DESCRIPTION |
CAPCOMŇ P/N |
|
BR1-4 |
RECTIFIER MB352W BRIDGE 35A 200V |
DI00101 |
|
BR1-4 Hardware |
HEAT SINK EXTRUSION AAVID 60015 |
* HS00105 |
|
BR1-4 Hardware |
MACHINE SCREW 10-32 X 3/4 PPH SEMS ZC |
SC00100-06 |
|
C1-4 |
CAPACITOR ELECTROLYTIC 50V 15000UF 20% RAD |
CP00010-01 |
|
C5-6,C44, CB2,CB7-11,CB13, CB26-30, CB33-38, CB40, CB48-52, CB54 |
CAPACITOR CERAMIC 50V .001UF 10% AX |
CP00049 |
|
C8-9,C13-19,C23-39, C42-43, C48-49, C52-53, C55-59 |
CAPACITOR CERAMIC 50V.22UF 20% AX |
CP00024 |
|
C83 |
CAPACITOR CERAMIC 50V .033UF 5% AX |
CP00047 |
|
C92,CB14-19, CB23-25,CB31, CB41, CB53, CB55, CF7-11, CF13 |
CAPACITOR CERAMIC 50V .01UF 10% AX |
CP00048 |
|
C93 |
CAPACITOR ELECTROLYTIC 100V 100UF 20% RAD |
CP00011-01 |
|
C94-95, CF1-5 |
CAPACITOR TANT 35V 1.0UF 10% RAD |
CP00059 |
|
C96 |
CAPACITOR ELECTROLYTIC 10V 470UF 20% RAD |
CP00016 |
|
C97 |
CAPACITOR ELECTROLYTIC 35V 4700UF 20% RAD
SNAP-IN |
CP00035 |
|
D1,D1B, D2,D2B, D3,D3B, D4,D4B, D7,D7B, |
DIODE 1N4004 RECTIFIER 1.0A 400VR |
DI00100 |
|
D9-16, D25-32, D34-35
D5,D5B, D6,D6B, |
DIODE 1N4004 RECTIFIER 1.0A 400VR |
DI00100 |
|
D33, D36-38 |
DIODE 1N5402 RECTIFIER 3.0A 200VR |
DI00106 |
|
F1 |
FUSE SLO-BLO 7.0A 250V 3AG |
FS00100-07 |
|
F2-3 |
FUSE SLO-BLO 10.0A 250V 3AG |
FS00100-10 |
|
F4-F6 |
FUSE SLO-BLO 3.0A 250V 3AG |
FS00100-03 |
|
F7-10 |
FUSE SLO-BLO 4.0A 250V 3AG |
FS00100-04 |
|
FH1-10 |
FUSE HOLDER 3AG PC MOUNTING |
FS00101 |
|
DES. |
DESCRIPTION |
CAPCOMŇ P/N |
|
J1 |
CONNECTOR HEADER.100 STRAIGHT 50-PIN 2X25 |
CN00101-50 |
|
J2 |
CONNECTOR HEADER .156 STRAIGHT 7-PIN LOCK |
CN00100-07 |
|
J3-4 |
CONNECTOR HEADER.156 STRAIGHT 5-PIN LOCK |
CN00100-05 |
|
J5-9,J12, J14, J17-19, J21-22, J25-27 |
CONNECTOR HEADER .156 STRAIGHT 9 PIN LOCK |
CN00100-09 |
|
J10-11 |
CONNECTOR HEADER .156 STRAIGHT 4-PIN LOCK |
CN00100-04 |
|
J13 |
CONNECTOR HEADER.100 STRAIGHT 6-PIN LOCK |
CN00104-06 |
|
J15-16 |
CONNECTOR HEADER .156 STRAIGHT 11-PIN LOCK |
CN00100-11 |
|
J20 |
CONNECTOR HEADER .156 STRAIGHT 3 PIN LOCK |
CN00100-03 |
|
J23 |
CONNECTOR HEADER.100 STRAIGHT 3-PIN LOCK |
CN00104-03 |
|
J24 |
CONNECTOR HEADER.100 STRAIGHT 9-PIN LOCK |
CN00104-9 |
|
LED1-10 |
LED LTL4201 RED 20MA T-1 70 ş |
DI00105 |
|
M1B,M2B,M3B,M4B, M5B,M6B, M7B,M8B,S1-16, S25-32 |
TRANS STP20N10L MOSFET N-CH |
TR00101 |
|
M10 |
TRANS 2N7000 MOSFET N-CH |
TR00109 |
|
Q1 |
VOLTAGE REGULATOR 5A LOW DROP ADJ |
VR00100 |
|
Q1 Hardware |
HEAT SINK TO-3 HEAVY DUTY 520103 |
* HS00104 |
|
Q1 Hardware |
MACHINE SCREW 6-32x1/2 PPH SEMS ZC |
SC00100-04 |
|
Q2 |
TRANS TIP102 NPN |
TR00102 |
|
Q1 Hardware |
NUT 6-32 HEX KEPS |
NT00101-06 |
|
R10-14 |
RESISTOR METAL OXIDE FILM 2W 5% 5.6K OHM |
RS00114 |
|
R51,R54, R68, R70, R72,R74, R76,R78, R80,R82, R89,R98, R137-139, R141,R152, R169,R172 R173,R176R177,R180R181,R184, R212,R215 |
RESISTOR CARBON FILM 1/4W 5% 4.7K OHM |
RS00100-26 |
A00177 _03 POWER DRIVER BOARD
(cont.)
|
DES. |
DESCRIPTION |
CAPCOMŇ P/N |
|
R52-53, R56-57, R92-93, R95-96, R120,R122,R124,R126, R128,R130, R132,R134,R154-155, R158-159, R191-194, R197-200,
R269-272, R275-278, R312-315, R400-401, R404-406 |
RESISTOR CARBON FILM 1/4W 5% 10K OHM |
RS00100-07 |
|
R62,R94,
R102,R135,R140,R150R151,R153,R160,R205, R236,R318 |
RESISTOR CARBON FILM 1/4W 5% 100 OHM |
RS00100-02 |
|
R63-66, R83-86, R165-168, R185-188, R208-211, R228-231, R286-289, R306-309 |
RESISTOR CARBON FILM 1W 5% .020 OHM |
RS00112-01 |
|
R67,R69, R71,R73, R75,R77, R79,R81, R170-171, R174-175, R178-179, R182-183, R213-214, R217-218, R221-222, R225-226, R291-292, R295-296, R299-300, R303-304 |
RESISTOR CARBON FILM 1/4W 5% 750 OHM |
RS00100-42 |
|
R97 |
RESISTOR METAL FILM 1/4W 1% 270 OHM |
RS00113-12 |
|
R99 |
RESISTOR CARBON FILM 1/4W 5% 330 OHM |
RS00100-12 |
|
R100 |
RESISTOR METAL FILM 1/4W 1% 200 OHM |
RS00113-11 |
|
R101,R162,R204,R235, R317 |
RESISTOR METAL FILM 1/4W 1% 7.50K OHM |
RS00113-08 |
|
R104,R418 |
RESISTOR CARBON FILM 1/4W 5% 3.3K OHM |
RS00100-27 |
|
DES. |
DESCRIPTION |
CAPCOMŇ P/N |
|
R119,R121,R123,R125, R127,R129, R131,R133,R407 |
RESISTOR CARBON FILM 1/4W 5% 1K OHM |
RS00100-05 |
|
R145 |
RESISTOR CARBON FILM 1/4W 5% 27K OHM |
RS00100-40 |
|
R156-157, R163-164, R189-190, R195-196, R201-202, R206-207, R232-233, R239-240, R273-274, R284-285, R310- 311, R319-320 |
RESISTOR CARBON FILM 1/4W 5% 56 OHM |
RS00100-41 |
|
R161,R203,R234,R316 |
RESISTOR METAL FILM 1/4W 1% 470 OHM |
RS00113-06 |
|
R216,R219R220,R223 R224,R227, R290,R293R294,R297 R298,R301R302,R305, R321-322 |
RESISTOR CARBON FILM 1/4W 5% 4.7K OHM |
RS00100-26 |
|
R402 |
RESISTOR METAL FILM 1/4W 1% 2K OHM |
RS00113-03 |
|
R403 |
RESISTOR METAL FILM 1/4W 1% 11K OHM |
RS00113-02 |
|
R408 |
RESISTOR METAL FILM 1/4W 1% 374 OHM |
RS00113 |
|
R409 |
RESISTOR METAL FILM 1/4W 1% 121 OHM |
RS00113-01 |
|
R410 |
RESISTOR CARBON FILM 1/4W 5% 820 OHM |
RS00100-30 |
|
R411, R415-416 |
RESISTOR CARBON FILM 1/2W 5% 1.2K OHM |
RS00102-11 |
|
R412 |
RESISTOR CARBON FILM 1/2W 5% 1.5K OHM |
RS00101-09 |
|
R413 |
RESISTOR METAL OXIDE FILM 2W 5% 6.2K OHM |
RS00114-02 |
|
R414 |
RESISTOR METAL OXIDE FILM 2W 5% 270 OHM |
RS00114-03 |
|
R417 |
RESISTOR METAL FILM 1/4W 1% 56.2K OHM |
RS00113-10 |
|
R419 |
RESISTOR METAL OXIDE FILM 2W 5% 620 OHM |
RS00114-01 |
|
RN1-2 |
RESISTOR SIP 10K X 9R 2% BUSSED |
RS00104 |
|
SM1B, SM2B, SM3B, SM4B, SM5B, SM6B, SM7B, SM8B |
TRANS VN02N MOSFET RELAY |
TR00105 |
A00177 _03 POWER DRIVER BOARD
(cont.)
|
DES. |
DESCRIPTION |
CAPCOMŇ P/N |
|
U1,U7, U12,U27, U33,U35, U40, U49, U54 |
IC LM339 VOLTAGE COMPARATOR |
IC00036 |
|
U8-11, U13,U28-31,U36-39, U50-53 |
IC 74LS74 DUAL D-TYPE FF |
IC00042 |
|
U14-15 |
IC 74LS138 3 OF 8 LINE DECODER |
IC00047 |
|
U16-18, U24-26, U34,U48, U55 |
IC 74LS244 OCT BFFR/LINE DR |
IC00057 |
|
U19 |
IC TPIC6273 D-TYPE FF |
IC00043 |
|
U19 |
20 PIN DIP SOCKET |
SK00 |
|
U23 |
IC 74LS273 OCTAL D-TYPE FF |
IC00041 |
+
Spacing between the bottom of the bridge and the PCB shall be 1/4". *
NOTE: Heat sink compound shall be
applied to ALL heat sink/ semi-conductor
surfaces.
A00217 _01 SOUND BOARD
SOUND BOARD ASSEMBLY A00217
_01
PARTS LIST
|
DES. |
DESCRIPTION |
CAPCOMŇ P/N |
|
C1,C4 |
CAPACITOR , CERAMIC 100V .001UF 10% SMT 1206 |
CP00055-SMT |
|
C2,C20 |
CAPACITOR , ELECTROLYTIC 25V 4700UF 20% RAD |
CP00020 |
|
C3 |
CAPACITOR , CERAMIC 50V .22UF 20% SMT 1210 |
CP00051-SMT |
|
C6-7,C24-25,C63-64, C73-75,C77 |
CAPACITOR , TANTALUM 35V 1.0UF 10% SMT |
CP00012-SMT |
|
C8,C10,C38 |
CAPACITOR , TANTALUM 25V 4.7UF 20% SMT |
CP00050-SMT |
|
C9,C11-17 C21,C42, C45,C51-52, C54-56, C59-61,
C67-C69, C71-72 C76, C79-81, C83,C88-C96 |
CAPACITOR, CERAMIC 50V .1UF 10% SMT 1206 |
CP00056-SMT |
|
C18 |
CAPACITOR , CERAMIC 100V .022UF 20% SMT 1206 |
CP00052-SMT |
|
C19,C22, C44,C70 |
CAPACITOR , CERAMIC 50V .033UF 5% SMT 1206 |
CP00061-SMT |
|
C23,C66 |
CAPACITOR , CERAMIC 100V 3300PF 20% SMT 1206 |
CP00064-SMT |
|
C30,C78 |
CAPACITOR , TANTALUM 16V 22UF 20% SMT |
CP00045-SMT |
|
C43 |
CAPACITOR , CERAMIC 100V 470PF 5% SMT 1206 |
CP00060-SMT |
|
C82 |
CAPACITOR , ELECTROLYTIC 16V 470UF 20% RAD |
CP00054 |
|
C84-87 |
CAPACITOR , CERAMIC 100V 100PF 10% SMT 1206 |
CP00058-SMT |
|
D1-6, D12-13 |
DIODE 1N4004 RECTIFIER 1.0A 400VR |
DI00100 |
|
D7,D9-11 |
DIODE 1N5402 RECTIFIER 3.0A 200VR |
DI00106 |
|
D8 |
DIODE 1N4148 SW 200MA 75VR |
DI00104 |
|
J1 |
CONNECTOR HEADER .156 STRAIGHT 7-PIN LOCK |
CN00100-07 |
|
J2,J3 |
CONNECTOR
HEADER .156 STRAIGHT 4-PIN LOCK |
CN00100-04 |
|
J4 |
CONNECTOR HEADER .156 STRAIGHT 5-PIN LOCK |
CN00100-05 |
|
J5 |
CONNECTOR HEADER .100 STRAIGHT 6-PIN LOCK |
CN00104-06 |
|
L1-2 |
IND CHOKE 4.7UH 3A AXIAL |
IN00100 |
|
LED1-2 |
LED LTL4201 RED 20MA T-1 70 ş |
DI00105 |
|
F14-F15 |
FUSE HOLDER 3AG PC MOUNTING |
FS00101 |
|
F14,F15 |
FUSE SLO BLO 3.0A 250V 3AG |
FS00100-03 |
|
R1 |
RESISTOR CARBON FILM 1/4W 5% 1 OHM |
RS00100-23 |
|
R2 |
RESISTOR CARBON FILM 1/8W 5% 100 OHM SMT 1206 |
RS00102-02S |
|
R3,R5 |
RESISTOR CARBON FILM 1/8W 5% 12K OHM SMT 1206 |
RS00102-15S |
|
R4,R85 |
RESISTOR CARBON FILM 1/8W 5% 1K OHM SMT 1206 |
RS00102-02S |
|
R6,R17 |
RESISTOR CARBON FILM 1/8W 5% 22K OHM SMT 1206 |
RS00102-18S |
|
DES. |
DESCRIPTION |
CAPCOMŇ P/N |
|
R8-9,R11 |
RESISTOR CARBON FILM 1/8W 5% 680 OHM SMT 1206 |
RS00102-06S |
|
R10,R53, R86,R90-R93 |
RESISTOR CARBON FILM 1/8W 5% 10K OHM SMT 1206 |
RS00102-05S |
|
R13-14 |
RESISTOR CARBON FILM 1/8W 5% 27K OHM SMT 1206 |
RS00102-21S |
|
R15 |
RESISTOR CARBON FILM 1/8W 5% 47K OHM SMT 1206 |
RS00102-17S |
|
R16 |
RESISTOR CARBON FILM 1/8W 5% 39K OHM SMT 1206 |
RS00102-16S |
|
R18-19, R21-22 |
NOT USED |
--------------------- |
|
R23 |
RESISTOR CARBON FILM 1/8W 5% 2.0K OHM SMT 1206 |
RS00102-19S |
|
R24,R26-27 |
RESISTOR CARBON FILM 1/8W 5% 4.7K OHM SMT 1206 |
RS00102-13S |
|
R34,R51 |
RESISTOR CARBON FILM 1/8W 5% 1.2K OHM SMT 1206 |
RS00102-09S |
|
R67 |
RESISTOR CARBON FILM 1/8W 5% 11K OHM SMT 1206 |
RS00102-20S |
|
R81 |
RESISTOR CARBON FILM 1/8W 5% 270 OHM SMT 1206 |
RS00102-07S |
|
R84 |
RESISTOR CARBON FILM 1/4W 5% 0 OHM |
RS00100-10 |
|
R87 |
RESISTOR CARBON FILM 1/8W 5% 33 OHM SMT 1206 |
RS00102-14S |
|
R94,R95 |
RESISTOR CARBON FILM 1/8W 5% 2.2K OHM SMT 1206 |
RS00102-23S |
|
U1,U3 |
IC 74LS112 DUAL J-K F/F SMT |
IC00093-SMT |
|
U2,U37 |
IC 74LS165 8-BIT SHIFT REGISTER SMT |
IC00089-SMT |
|
U4 |
IC TDA2030A 18W HI-FI AMP |
IC00056 |
|
U4 |
HEATSINK TO-220 W/KOOL CLIP |
HS00102 |
|
U5,U32 |
IC 74HC74 DUAL D-TYPE F/F SMT |
IC00087-SMT |
|
U6 |
IC 74LS74 DUAL D-TYPE FF SMT |
IC00042-SMT |
|
U10 |
IC X9241U QUAD E2POT 50K SMT |
IC00061-SMT |
|
U11,U14 |
IC TLO84 OPERATIONAL AMP SMT |
IC00037-SMT |
|
U12 |
IC TDA1545 16-BIT DAC SMT |
IC00091-SMT |
|
U16,U39 |
IC 74LS161 4-BIT SYN BIN CTR SMT |
IC00083-SMT |
|
U18-19 |
IC 74LS04 HEX INVERTER SMT |
IC00048-SMT |
|
U22 |
IC TMS320AV120 MPEG AUDIO DECODER SMT |
IC00086-SMT |
|
U24 |
IC87C52 PROGRAMMED MICOCONTROLLER |
XXXXXXXX |
|
U24 |
SOCKET 40-PIN DIP |
SK00112-40 |
|
U25-26 |
IC 74LS08 QUAD 2-IN AND GATE |
IC00088-SMT |
|
U27 |
IC SRAM32KX8 SMT |
IC00090-SMT |
|
U28-31 |
ROM SOCKET 32PIN600 |
SK00112-32 |
|
*U28 |
ROM, MASKED |
XXXXXXXX |
|
*U29 |
ROM, MASKED |
XXXXXXXX |
|
*U30 |
EPROM, PROGRAMMED |
XXXXXXXX |
|
*U31 |
EPROM, PROGRAMMED |
XXXXXXXX |
|
U33 |
IC 74LS00 QUAD 2-IN NAND GATE SMT |
IC00084-SMT |
|
U34-36 |
IC 74LS373 OCT D-TYPE LATCH SMT |
IC00092-SMT |
|
X1 |
CLOCK OSCILLATOR 24MHZ |
OS00101 |
*
NOTE: Game ROMs are not included
with A0015003: must be purchased
separately. NOTE:
C57 & 58 are replaced with jumper wires.
A00154 _05 CPU BOARD
CPU BOARD ASSEMBLY A00154 _05
PARTS LIST
|
DES. |
DESCRIPTION |
CAPCOM®
P/N |
|
C1,C8,C16, C18,C20-21, C24,C26-27 |
CAPACITOR CER 50V .1UF 10% SMT 1206 |
CP00056-SMT |
|
C2-6, C9, C19,C23, C24,C64-79 |
CAPACITOR CER 50V .01UF 10% SMT 1206 |
CP00048-SMT |
|
C10-13 |
CAPACITOR CER 50V .001UF 10% SMT 1206 |
CP00055-SMT |
|
C15,C17, C40-41, C49-63,C80 |
CAPACITOR CER 100V 100PF 10% SMT 1206 |
CP00058-SMT |
|
C28,C31-36 |
CAPACITOR TANT 35V 1.0UF 5% AX |
CP00012 |
|
C29-30, C42-47 |
CAPACITOR CER 100V 10PF 10% SMT 1206 |
CP00017-SMT |
|
C48 |
CAPACITOR ELECTROLYTIC 16V 470UF 20% RAD |
CP00054 |
|
D1-16 |
DIODE 1N4148 SW 200MA 75VR |
DI00104 |
|
J1 |
CONNECTOR HEADER .156 STRAIGHT 5-PIN LOCK |
CN00100-05 |
|
J2,J4 |
CONNECTOR HEADER .100 STRAIGHT 7-PIN LOCK |
CN00104-07 |
|
J3 |
CONNECTOR HEADER .100 STRAIGHT 14-PIN LOCK |
CN00104-14 |
|
J6 |
CONNECTOR HEADER .100 STRAIGHT 6-PIN LOCK |
CN00104-06 |
|
J7,J9 |
CONNECTOR HEADER .100 STRAIGHT 10-PIN LOCK |
CN00104-10 |
|
J8 |
CONNECTOR HEADER .100 RT 14-PIN 2X7 4W |
CN00137-14 |
|
J10 |
CONNECTOR HEADER .100 STRAIGHT 50-PIN 2X25 |
CN00101-50 |
|
L1 |
IND 4.7UH 3.4A 15% AX |
IN00100 |
|
LED1-2 |
LED LTL4201 RED 20MA T-1 70 ş |
DI00105 |
|
Q1 |
TRANSISTOR 2N3904 NPN G.P. AMP |
TR00106 |
|
R1,R10 |
RESISTOR CARBON FILM 1/8W 5% 33 OHM SMT 1206 |
RS00102-41S |
|
R2-3 |
RESISTOR CARBON FILM 1/8W 5% 270 OHM SMT 1206 |
RS00102-03S |
|
R4-7 |
RESISTOR CARBON FILM 1/8W 5% 4.7K OHM SMT 1206 |
RS00102-26S |
|
R8 |
RESISTOR CARBON FILM 1/8W 5% 1K OHM SMT 1206 |
RS00102-05S |
|
R9 |
RESISTOR CARBON FILM 1/8W 5% 1.2K OHM SMT 1206 |
RS00102-08S |
|
R12-17 |
RESISTOR CARBON FILM 1/8W 5% 100 OHM SMT 1206 |
RS00102-02S |
|
R18-21 |
RESISTOR CARBON FILM 1/8W 5% 3.3K OHM SMT 1206 |
RS00102-27S |
|
R22-23 |
RESISTOR CARBON FILM 1/8W 5% 10K OHM SMT 1206 |
RS00102-07S |
|
RS1,RS3 |
RESISTOR SIP 4.7K X 9R 2% BUSSED |
RS00111 |
|
RS4,RS7 |
RESISTOR SIP 1.2K X 9R 2% BUSSED |
RS00103 |
|
RS5-6,
RS9-12 |
RESISTOR SIP 10K X 9R 2% BUSSED |
RS00104 |
|
*U1H |
EPROM |
XXXXXXXX |
|
*U1L |
EPROM |
XXXXXXXX |
|
*U2H |
ROM, GAME |
XXXXXXXX |
|
*U2L |
ROM, GAME |
XXXXXXXX |
|
U1H,U1L, U2H,U2L-1 |
SOCKET 32 PIN .600 DUAL WIPE |
SK00112-32 |
|
U1 |
IC 74LS02 QUAD NOR SMT |
IC00098-SMT |
|
U2-6 |
IC 74LS245 OCT BUS TRANSCEIVER SMT |
IC00044-SMT |
|
U8 |
IC XC68306 MPU 16-BIT |
IC00046 |
|
U9 |
IC 74LF139 DUAL 2-4 DECODER SMT |
IC00117-SMT |
|
U10-13 |
IC LM339 VOLTAGE COMPARATOR SMT |
IC00036-SMT |
|
U14 |
IC SRAM 8K X 8 100NS BAT |
IC00035 |
|
U15 |
IC 74LS14 HEX SCHMITT TRIG SMT |
IC00063-SMT |
|
U16 |
SOCKET IC 84-PIN PLCC |
SK00101-84 |
|
U16 |
ACTEL 1020 PROGRAMMED |
IC00106 |
|
U17 |
IC 74LS74 DUAL D-TYPE FF SMT |
IC00042-SMT |
|
U22-23 |
IC 74LS257 QUAD 2-IN MUX SMT |
IC00045-SMT |
|
U24 |
IC MAX699 RESET CHIP |
IC00097 |
|
U25 |
IC DRAM 256K X 16 100NS |
IC00074-SMT |
|
X1 |
CRYSTAL 16.67 MHZ |
CR00103 |
*NOTE:
Game ROMs are not included with
A0015404: Must be purchased separately.
DISPLAY POWER SUPPLY BOARD
A00155 _05
|
DES. |
DESCRIPTION |
CAPCOM® P/N |
|
*C1 |
CAPACITOR ELECTROLYTIC 25V 4700UF 20% RAD |
CP00020 |
|
*C2 |
CAPACITOR ELECTROLYTIC 25V 220UF 20% RAD |
CP00041 |
|
*C3,C5 |
CAPACITOR ELECTROLYTIC 160V 47UF 20% RAD |
CP00034 |
|
*C4 |
CAPACITOR ELECTROLYTIC 200V 6.8UF 20% RAD |
CP00042 |
|
C7 |
CAPACITOR CERAMIC 50V .1UF 10% AX |
CP00019 |
|
C8 |
CAPACITOR TANTILUM 35V 1.0UF 5% AX |
CP00012 |
|
D1-3 |
DIODE 1N5819 1A 40V SCHOTTKEY |
DI00108 |
|
D4-6 |
DIODE MUR160 1A 600V ULTRA FAST RECOVERY |
DI00113 |
|
D7 |
DIODE, IN5402 RECTIFIER 3.0A 200vR |
DI00106 |
|
HS1 |
HEAT SINK TO220 0.5 X 0.75W |
HS00103 |
|
J1 |
CONNECTOR HEADER .156 STR 6-PIN LOCK |
CN00100-06 |
|
J2 |
CONNECTOR HEADER .156 STR 8 PIN LOCK |
CN00100-08 |
|
R1 |
RESISTOR METAL FILM 1/4W 1% 64.9K OHM |
RS00113-04 |
|
R2 |
RESISTOR METAL FILM 1/4W 1% 1.24K OHM |
RS00113-05 |
|
R4 |
RESISTOR CARBON FILM 1/4W 5% 1.5K OHM |
RS00100-09 |
|
R5 |
RESISTOR CARBON FILM 1/2W 5% 47K OHM |
RS00100-20 |
|
R6 |
RESISTOR CARBON FILM 1.0W 5% 15K OHM |
RS00112-03 |
|
R7 |
RESISTOR CARBON FILM 1/2W 5% 12K OHM |
RS00100-18 |
|
R8 |
RESISTOR CARBON FILM 1/4W 5% 330 OHM |
RS00100-12 |
|
T1 |
XFMR FLYBACK 47UH 30VA 13-23VDC |
XF00103 |
|
U1 |
SWITCHING REGULATOR LT1271CT HI EFF |
IC00082 |
|
Z1 |
DIODE 1N4748 ZENER 1W 22V |
DI00110 |
*
CAPS: C1-C5 are special capacitors
for switching power supplies, they are low
impedance, high ripple current capacitors.