This Capcom Service Bulletin applies to:
Pinball Magic Pinball

Back to all Capcom Pinball Service Bulletins

COIN-OP, INC.
(Pinball Division is out of business)

TECHNICAL SERVICE BULLETIN 95-013a

DATE:†††††††††††††††††††† ††††† NOVEMBER 21, 1995

SUBJECT:††††††††††††††††††† V1.03†† SOFTWARE UPDATE

TO:†††††††††††††††††††††††††††††† ALL DISTRIBUTORS

GAME:††††††††††††††††††††††††† PINBALL MAGIC

AFFECTS S/Nís:†††††††††† ALL S/NíS

* REPLACE EPROMís U1L AND U1H WITH THE NEW SOFTWARE.

FOLLOWING IS A LIST OF THE CHANGES IMPLEMENTED IN V1.03.

* FIXED CLEAR CREDITS FUNCTION SO THAT IT WOULD RESET THE COINAGE TABLE AS WELL AS THE ACTUAL NUMBER OF CREDITS. ON EARLY SOFTWARE YOU WOULD CLEAR CREDITS AND AT TIMES IT WOULD RESET TO 1/2 CREDIT.

* [ B3-01]ADDED TRANSLATIONS FORFRANCE, GERMANY, SPAIN, AND HOLLAND. WHEN YOU SET THE COUNTRY IT WILL CHANGE B3-02 TEXT, AND B3-03 SPEECH TO THE DEFAULT FOR THAT COUNTRY.

* [ A1, A2] ADDED AN AUDIT AND ADJUSTMENT TO SET THE BASE COIN VALUE. IN PRIOR SOFTWARE YOU WOULD DISPLAY THE NUMBER OF COINS. IN V1.03 YOU WILL DISPLAY COIN VALUE.

* [C1-09] ADDED TICKET DISPENSER CAPABILITY. IN PRIOR SOFTWARE C1-09 WAS ĎBURN-INí.

IN V1.03 C1-09 IS DISPENSER TEST.THIS IS FOR USE WITH A TICKET DISPENSER.C1-10 IS NOW ĎBURN-INí.

<

* CHANGED THE OPTO TEST NUMBER FROM J13 TO J15. TO AID SERVICE THE ĎJí CONNECTORS ON THE POWER SUPPLY BOARD WERE RE-NUMBERED IN SEQUENCE.THE PRE-PRODUCTION BOARDS HAD RANDOM NUMBERING. J13 ON THE PRE-PRODUCTION PCBís AND J15 ON PRODUCTION PCB ARE THE SAMEPHYSICAL ĎJí CONNECTOR.

†††††††††††